BG1332 Double roller conveyer veneer drier
Roller conveyer veneer drier is key equipment for drying wood before cutting and especially for drying thick veneer.
BG series wire net veneer dryer mainly dries veneer of plywood.
feature:
1. Uses compound straight to the air current round-robin mode, the steel aluminum rolls over the gilled radiator, the consumption is low,the veneer smothness is good after drying.
2.This drier has used many high technologies and the advanced electrically controlled technology, High-efficiency、 energy-saving、good quality drying and so on are the characteristics of this drier.
comments:
This chamber length from this table is the standar number, according to the craft and the output request, the user may increase or cut down the chamber's pitch fitly,including adjust the cooling bytes,whether select the EAF,otherwise, also according to the craft selection,the roller drier gernerally make cutting before drying, select the roller in order put into the machine, if there is any special request, could be possible to arrange before the ordering.
type model dependent parameter BG1332 Double roller conveyer veneer drier capacity of veneer dryer kg/m3 550 length of veneer dryer mm 1.5 initial water content of veneer dryer﹪ 80 final water content of veneer dryer﹪ 10 working load factor﹪ 80 technical details working length mm 2800 working level mm 2 length of heating champer mm 2000×8 ＝ 16000 length of cooling champer mm 2000×1 driving speed m/min 1.5 ～ 15 dryer capability m3/h 1.8 ～ 2.5 steam consumption kg/h 1500 ～ 2000 full capacity motor kW 73.2 drive motor kW 5.5×2 hot blower motor kW 7.5×8 cooling blower motor kW 2.2×1 exhaust wetting fan motor kW / overall demessions(L*W*H) mm 23000×4215×2670 weight kg ～ 32,000
